FLITELite

GEN II Lip Light - NVIS White

$64.95
  • Gen II lip light with white NVIS filtered light for the Bose aviator headset
  • Gen II lip light with white NVIS filtered light for the Bose aviator headset
  • White NVIS filtered Gen II lip light for Lightspeed aviator headset
  • Gen II white NVIS filtered lip light for David Clark headset
  • FLITELite Aviation NVIS lip light
  • Gen II lip light with white NVIS filter for David Clark M-101 microphone/headset
  • White NVIS filtered Gen II lip light for Lightspeed headset
  • Black nylon dual AA battery pack

FLITELite

GEN II Lip Light - NVIS White

$64.95

FLITELite GEN II Dual Sensor Pilot Light: NVIS White filtered developed to meet the demanding MIL-STD-3009, for Night Vision Imaging Systems (NVIS) aircrew auxiliary and utility lighting. 

FLITELite comes complete with: 

  • GEN II FLITELite Unit in NVIS White 
    • Headset or Helmet Adapter (new adapters are free, only shipping is charged)
    • Choice of Battery Pack
      • 3 Cell AAA Nylon Battery Pack
      • 2 Cell AAA Hard Polymer Battery Pack
      • 2 Cell AA Nylon Battery Pack
    • Attachment accessories
    • AAA Batteries
    • Warranty

    MIL-STD-3009 specifies an NVIS 'White', a 'cool', full spectrum color that has a slight green tint to it, but still allows the aircrew to see all colors.   Military and civilian aircrew that fly with Bose, David Clark, or Lightspeed headsets will appreciate the custom fit of the FLITELite adapter system.
    GEN II accommodates pilots with headsets with shorter booms with incorporation of an 11 degree light angle. Longer booms can easily put the light in the proper position, now shorter booms can as well.

    FLITELite GEN II microprocessor receives information from two sensors, the rear sensor faces the mouth and the front sensor activated by the finger:
    • The rear sensor controls on and off functions, with a simple touch of the lip, the light turns on or off.
    • Battery life is protected by a computer controlled sixty minute auto-off.
    • The front sensor drives the brightness of the light. Touching the front sensor places the light to min bright to protect night vision, then slowly cycles to full bright.
    • The computer places this brightness setting into memory, and recalls the lighting level the next time the light is turned on.
    • Removing battery power clears the light memory.
    • The light is filtered through a special (and expensive) NVIS filter material on Night Vision Goggle compatible versions.

    Internal components are the highest quality, FLITELite is made in America. Design flexibility is achieved by using a specially designed circuit board, the same material used in the Mars Lander. The latest in sensor technology is controlled by proprietary software. All of the components are sealed by a dielectric epoxy prior to being ultrasonically welded to protect your investment.

    FLITELite is perfect for normal and emergency use. During normal operations FLITELite is great for reading charts and approach plates. FLITELite fills in dark spots, improves gauge visibility, and brightens up areas without light such as fuel selectors, etc...During emergency operations, FLITELite makes the electrical failure much less of an event. FLITELite has already logged several saves after electrical failures.


    GEN II Control Demonstration

     

     

    Pick Your Light

    Choose the Micro, GEN II, Operator, Classic, or Fingerlight, Power Station, or MOLLE Light

    Choose Your Adapter

    Pick your lip light adapter and preferred battery pack - or just shoot us a mic picture and we can select for you.

    Operate

    Mount your new kit on your mic boom, light up with a finger light or power station and OPERATE!